HFSPC-1100 Vehicle-mounted water well Drilling Rig

Drilling Diameter: 520mm
Drilling Depth:600-1100m
Engine Power:203/55x2kW-264/227kW
Rotary Torque:60kN.m

product Introduction

SPC series drill locomotive vehicle wheel rotary drill rig, will be in addition to the tool of all components (including: power, gearbox, gearbox, drawworks, rotary table and mud pump and rig, etc.) all integrated installation onto the truck chassis. With auxiliary motion of the drill is given priority to with mechanical drive, and part of the operation performed by the hydraulic control. Not only the traditional drill less consumption, easy operation and good maintenance, fault, the characteristics of less also has a convenient vehicle rig transitions and the advantages of easy operation.

The series with rotary rotary drilling rig, mud was cycle as the main way to work, in the clay, sand, rock and other strata in drilling. For Wells, hydrogeological exploration hole, in-situ leaching uranium mining Wells, grouting holes, grouting holes for engineering construction, the shallow coal seam of porosity pore or other engineering construction.

This series of drilling rig compared with the same kind of drilling rig, increased capacity reserve coefficient, equipped with security lighting system and auxiliary power unit, drill abity more and more human.

TECHNICAL DATA

Type HFSPC-600 HFSPC-1100
Drilling Diameter(mm) 520 520
Drilling Depth(m) 600 1100
Drill pipe(mm) 108 x 108 x 10500 108 x 108 x 10500
Hole drill pipe(mm) 89x9500 89x9500
Engine model MC07.28-50/Y250M-4 QSL8.9-C360/SC13G310D2+G0219
Engine Power(kW) 203/55x2 264/227
Rotary table The hole diameter(mm) 520 520
speed(r/min) 22、39、65、101、145、190、23 (Reverse) 23、40、69、110、182、219、23 (Reverse)
Feed mechanism form Mechanical winch Hydraulic
Ability to add and subtract pressure(KN) 300(stress reliever) 350/220
Add and subtract pressure stroke(mm) 10800 10800
Shackle maximum torque(kN.m) / 60
Hoist Single rope tension( kN) 50 (Lord)、 50 (vice) 70 (Lord) 、1.5 (vice)
Rope capacity(m)  150/Ф18  150/Ф20
Speed on the second floor (m/s) 1.1、1.8 1.9
Mud pump model 3NB-130 3NB-130
Maximum flow(L/min) 1000 1000
The highest pressure(MPa) 10 10
Rig The bearing capacity(t) 40 60
Effective height(m) 15 15
Chassis TAZ5305TYTA TAZ5415TYT
Drive way 6x4/6x6 8x4/8x8
Highest speed(kM/h) 80 80
Minimum turning diameter(m) 22 29
Clearance from the ground(Fully loaded)(mm) 255 314
Braking distance ( 30Km/h)(m) ≤10 ≤10
Crew/operator 2 2
Overall dimensions(LxWxH) 13830 x 2550 x 4000mm 14200 x 2525 x 3930mm
Weight(t) 30 38

MESSAGE

  • Your name

  • Your Email*

  • Your phone

  • Product Name

  • Drilling Diameter*

  • Drilling Depth*

  • Message

Home Tel Mail Inquiry