HFJ13 Jumbo Drilling Rig
- Drilling Diameter: 45-89 mm
- Traveling Speed:12/4.5km/h
- Engine Power:60kW
- Weight:≤12.17t
product Introduction
Hanfa Group underground tunneling series of drilling RIGS are widely used for underground mining, small tunnel tunneling and bolt hole reinforcement projects. Their well-designed shape, configuration, system control and other aspects will provide customers with a better perforation experience.
Features
- 1HFJ13 tunneling trolley is widely used in underground mine development, small tunnel tunneling, and bolt hole reinforcement engineering.The well-designed HFJ13 will provide customers with a better perforation experience in terms of appearance, configuration, system control and other aspects.The chassis and lifting safety ceiling based on safety considerations ensure the passability and stability of the equipment, so that the operator can always work in a safe position;"Direct" positioning of the drill arm system to achieve rapid and accurate positioning of the hole;The power of the HF104M drilling machine can reach 20KW, and its frequency of 60Hz is a strong guarantee for efficient drilling. The double-buffer shock absorption system and automatic drilling adaptation system can not only improve the penetration efficiency, but also effectively reduce the consumption of drilling tools and improve the production efficiency. /li>
- 2Hydraulic rock drilling control system, with automatic hole opening, no lubrication, no water, no impact, rotary pressure automatic control push, push pressure automatic control impact and automatic anti-stick drill functions;Walking before and after two speed shift, overload climbing, the engine does not shut off, automatically adapt to reduce speed and increase output torque;The electrical system USES THE CAN communication connection technology, the module divides the area layout design, the simplification circuit, enhances the reliability;Unique hole bottom slag flushing function, clean drilling, convenient charging.
- 3Heavy-duty aluminum alloy propulsive beam with high flexural and torsional strength and long service life;The surface of the propelling beam is covered with stainless steel, and teflon wear-resistant gasket is used between the moving parts to improve the service life.
- 4The double two Angle suspension support drill arm can ensure the accurate hydraulic parallel holding function in all directions;Heavy-duty telescopic boom, with the most dispersed stresses such as bending, shear and torsion, box structure, bearing capacity of more than 1.5 tons.
TECHNICAL DATA
| Perforation range |
45-89 mm |
| Drill pipe specification |
T38-H35 R32/3,700mm |
| Wiertarka skalna model |
HF104M |
| Diesel Engine |
Cummins OSB3.9-C80-31 |
| Diesel engine power |
60 kW@2,200 rpm |
| Main motor power |
55 kW |
| Pump pressure and displacement |
12bar 4 m³/h |
| Air compressor pressure and displacement |
8bar 0.3m³/min |
| Total length of the propeller |
5,500 mm |
| Walking speed |
12/4.5km/h |
| Climbing angles |
14° |
| Driving turning radius |
Inner R2,800mm outer R4,900mm |
| Work end face size (width × height) |
6,600x5,670 mm |
| Maximum working area |
35 m² |
| Dimension (L x W x H) |
10,902*1,650*2,100/2,690mm |
| Weight |
≤12.17T |
